RV auto-leveling systems such as the Lippert Ground Control # LC358590 may sometimes need to be reset to clear error codes. To clear that code, you can press the retract button and the enter button simultaneously hold both for about 3 seconds and it will clear the error code. You can also try powering down the entire system and waiting a few minutes before reconnecting power.
You also always have the option of manually raising or lowering the jacks using the access ports on the bottom... view full answer...
If you're getting an "Excess Angle" error on your Lippert Ground Control 3.0 Electric 5th Wheel RV Leveling System w Touchpad and Remote - 4-Point Set # LC358590 that would indicate that an excessive angle was reached during auto-operation.
To fix this you're going to need to re-locate your trailer to more level ground. It also wouldn't hurt to check the controller and ensure that it is properly secured as that can also throw that code.
Since you're getting no power you likely have a... view full answer...
First, I recommend removing your Jensen Mechless RV Stereo # JWM10A from the wall and removing the fuse from the back of the unit to fully reset it. If this doesn't fix the issues you're having with the unit not powering down when you press the power button then you can install a fuse bypass switch like the # BX88272 to cut the power with the flip of a switch. view full answer...
Go To Results